The H2O HD® is designed to thoroughly clean floor surfaces, such as marble, ceramic, stone, tile, linoleum, sealed hardwood floors and parquet. Not all floor types are suitable for steam cleaning.

The heat and steam action may remove the wax on surfaces treated with wax. Do not use on unsealed flooring or let unit stand on any wood or heat sensitive floor for an extended period of time. This could cause the wood grain to rise, in addition to other types of damage. When using on vinyl, linoleum or any other. Test the H2O HD® on a small isolated area of your flooring prior to overall use on any floor surface.

Heat sensitive floors, use extra caution. Too much heat can melt glue in the flooring. Use only on laminated flooring that has been laid professionally and without any gaps or cracks that would permit the entry of moisture. Test the H2O HD® on a small isolated area of your flooring prior to overall use on any floor surface. Always check the use and care instructions of your flooring manufacturer or distributor before using the H2O HD® When in doubt, please consult a flooring specialist. Only use the carpet glider on carpeting and rugs. Use of the carpet glider on other floor surfaces will case streaking and possibly scratching. This product emits steam and creates moisture. Water marks, discoloration or damage to the floor surface can occur if the unit is left operating too long in one place.

When using the H2O HD® on carpet surfaces: Place the Mop Head, with Microfiber Cloth in place, on top of the carpet glider (see User's Guide for illustration). Do not attempt to use the H2O HD® unit on carpet/rug surfaces without the carpet glider in place.

The round nylon brushes are great for cleaning smooth hard surfaces, such as toilets, sinks, and kitchen counters. The brushes can also effectively clean the grease on pans, stoves and ovens in the kitchen. They can be used with soap or detergent to clean dirty areas.

Microfiber cloth care:

• Machine wash 60 ºC (140 ºF)
• Do not use bleach
• Do not use softener

Yes. It is important to replace the water filter every three to four months or after approximately 20 to 25 uses as the filter becomes visibly dirty. The Water Filter removes minerals and other impurities from tap water and also works to prevent water deposits from damaging your H2O HD® Steam Cleaner. To maximize the performance of your filter, distilled water may be used. If you need additional filters, check the accessory section of the Thane Clean™ site.

Unplug Power Cord from outlet. Allow Mop Pad/Cloths to cool down and carefully remove cleaning cloth from Mop Head, as cleaning cloth could still be hot. Any water remaining in the Water Tank should be emptied prior to appliance storage. Always empty the Water Tank at the end of each use. Let any water (that may remain as a product of condensation) drain from the steam opening prior to storing the appliance. Wrap Power Cord around Upper and Lower Cord Wrap. Wipe all surfaces of the H2O HD® a soft cloth. Store in a protected, dry area. Please store the unit in a cool and dry place when not in use. Do not leave it exposed to sunlight or rain.

Buy H2O HD replacement cloths, coral cloth, scents and more accessories.

Buy Accessories

*Kills 99% Of Bacteria, Viruses And Germs. Controlled lab tests have shown that when applied for 15 seconds, H2O HD can kill 99% of common germs, bacteria and viruses. Efficacy varies according to treatment time and surface treated.

†"H2O" series steam cleaners have been sold in over 80 countries worldwide.